STUDY ON THE PROPERTIES OF DIAMOND FILMS ON CEMENTED CARBIDE SUBSTRATES BY SURFACE IMPLANTATION PRETREATMENT PROCESS

The deposition of diamond films on tungsten carbide-based tools can greatly improve the life and performance of cutting tools. However, the deposition of diamond coatings on cemented carbide (WC-Co) suffers from poor film-base bond strength. In this paper, diamond coatings were deposited of phytocrystalline metal micropowders (pure, Nb, Ti, Ta) pretreatment method and the properties of diamond films were analyzed by energy spectrometry (EDS), scanning electron microscopy (SEM), Raman spectroscopy and bonding strength test of diamond films. The results show that through the experiment of the pretreatment process of surface implanted crystal metal micropowder, the best implanted crystal metal micropowder was obtained, the surface quality of implanted crystal titanium (Ti) coating was improved, the diamond Raman peaks were sharp and the indentation cracks had a crack diameter of 389 [Formula: see text]m, which is small and has the highest bond strength. The pretreatment process of phytocrystalline diamond micropowder can deposit high-performance diamond coatings and improve the bonding strength between the coating and the substrate film base.