Synthesis of Activated Charcoal from Coconut Shell for the Removal of Crude Oil Spill

Crude oil spills have devastating effects on the environment, particularly aquatic ecosystems. The purpose of the present research is to determine whether dry coconut shells can be used as raw materials to make activated charcoal (AC) via pyrolysis and whether they can be utilized as natural sorbents to clean up crude oil spills. The UV-Vis spectrum of the synthesized CSAC shows distinct peaks at 230 and 260 nm, whereas the activated charcoal exhibits peaks at 231 and 261 nm. The FTIR spectra of the synthesized CSAC reveal a medium broad absorption peak at 3307.2 cm⁻¹, while the raw coconut shell's FTIR spectra show a medium sharp peak at 2945.3 cm⁻¹. The SEM images highlight the unique structural properties of CSAC, showcasing high porosity, varied pore sizes, rough surface topography, and the presence of micropores and mesopores. The chemical activation significantly increased the hydrophobicity of the adsorbent, creating CSAC with a much better adsorption capacity for crude oil removal, having a maximum adsorption capacity of 4840.0 mg/g and the highest percentage of crude oil removal at 99.9985%, as proven by batch experiments for different adsorbent dosages. The batch experimental results indicated that the percentage of crude oil removal increased with an increase in adsorbent dosage and contact time. Based on the correlation coefficients (R²) values (close to unity), it was generally observed that the plots match the Freundlich isotherm better than the Langmuir isotherm model. These findings have made the synthetic CSAC an attractive, useful, and environmentally friendly adsorbent.