3D electro-elastic static analysis of advanced plates and shells

The proposed three-dimensional (3D) coupled electro-elastic shell model allows the static analysis of smart structures embedding classical piezoelectric and functionally graded piezoelectric layers. Plates, cylindrical and spherical panels are investigated in both sensor and actuator configurations. The primary variables of the coupled model are displacement components and the electric potential. Therefore, displacements, stresses, strains, electric potential and electric displacements are calculated for smart structures used as sensors (applied mechanical load) and smart structures used as actuators (applied electric potential). In the case of spherical shells, 3D equilibrium equations are coupled with the 3D divergence electric displacement equation. The obtained coupled system is also valid for cylindrical shells and plates thanks to the use of a mixed curvilinear orthogonal reference system. The partial differential governing equations are solved using the Navier harmonic form and the exponential matrix method for simply supported structures. Preliminary assessments are proposed to validate the model and further benchmarks are analyzed to discuss the effects connected with the thickness ratio, the lamination scheme, the load conditions, the geometry of the structures and the employed materials. The main innovation point of the proposed model is the possibility to analyze several geometries including different materials and applied loads by means of a unique and general formulation where partial differential equations are solved in closed form. The use of functionally graded piezoelectric materials allows to eliminate all stress component discontinuities at each layer interface. • A 3D coupled layer-wise electro-elastic shell model is proposed. • 3D governing equations are solved via harmonic forms and exponential matrix method. • Orthogonal mixed curvilinear system for curved and flat structures. • Load boundary conditions for actuator and sensor configurations are imposed. • Zigzag effects and interlaminar continuity conditions are included.