Enhanced removal of tetrabromobisphenolA (TBBPA) from e-waste by Fe–S nanoparticles and Fe–S/CuS nanocomposite with response surface methodology (RSM)

TetrabromobisphenolA is a well-known member of the brominated flame retardant group and is widely used as a highly effective fire-retardant additive in electronic and electrical equipment. TBBPA is commonly found in various environmental sources and can be harmful to human health. This study presents a simple approach to preparing a magnetic nanocomposite, offering a straightforward method that results in consistent quality and low resource consumption. The nanocomposite has a high surface-to-volume ratio for the removal of tetrabromobisphenolA. Various characterization techniques, including XRD, FTIR, EDX, FESEM, VSM, TEM, and BET analyses were used to characterize the Fe-S nanoparticles and Fe-S/CuS. The results showed that Fe-S/CuS nanocomposite successfully removed over 97% of the initial TBBPA (15 mg L^-1) under optimized conditions determined by RSM, such as a contact time of 15 min, pH of 7, Fe-S/CuS nanocomposite dosage of 0.69 g L^-1, and salt concentration of 0.10%. The RSM analysis provided a second-order polynomial model with a confidence level of 93% (F = 29.58; p < 0.0001) to predict the TBBPA removal efficiency at various concentrations. In the adsorption kinetic studies, the second-order kinetic model provided the best fit for the experimental data. Additionally, Fe-S/CuS nanocomposite shows great potential for practical applications and environmental remediation efforts, making it a valuable asset for real-sample use in environmental settings.