Recovery of both volatile fatty acids and ammonium from simulated wastewater: Performance of membrane contactor and understanding the effects of osmotic distillation

Membrane Contractor (MC) is a separation method that has had growing interest because of its recovery performance and comparably lower energy consumption. Herein, a two-stage recovery MC system was investigated to recover volatile fatty acids (VFAs) and ammonium from simulated wastewater. The MC achieved the total VFA recovery of 77 % ± 3 %, 82 % ± 5 %, and 74 % ± 8 %, with 0.1, 0.3, and 0.5 M NaOH permeate solutions, respectively. The 0 M NaOH permeate recovered only 38 % ± 2 % of the VFAs due to the osmotic distillation occurring in the opposite direction (permeate to feed) of the VFA transport. Despite the initial pH of the feed solution, osmotic distillation was similar when the permeate was maintained at 0.5 M NaOH. The vapor pressure changes at each sampling period showed high correlation with the water transported (R2=0.958). Ammonium recovery was not significantly different when the pH was maintained while increasing the molarity of the H2SO4 permeate, likely due to the high vapor pressure of ammonia gas. Multi-criteria decision analysis was used to determine the optimal operation conditions for MC operation. The results of this study would encourage further exploration of MC technologies for efficiency recovery of VFA and ammonium from wastewater.