Groundwater quality analysis in Hail region of northwest Saudi Arabia based on physicochemical investigation

The acquired groundwater data from seventeen wells were hydrochemically analyzed for Sulfate, Chloride, Ammonia, Nitrate, Nitrite, pH, EC (Electrical Conductivity), TDS (Total Dissolved Solids), total hardness, and total alkalinity concentrations and then compared to the national and international standards. The results range as follows: pH (6.65–8.26), EC (382–1214 μS·cm−1), Total hardness (72–310 ppm), TDS (258–775 ppm), Total alkalinity (54–138 ppm), Cl- (19–202 ppm), Ammonia (NH3) (0.0 to 1.5 mg/liter), Nitrate (NO3) (4.7 to 65.6 ppm), Nitrite (NO2) (0.007 to 0.05 ppm), and sulfate (SO4) (29–278 ppm). About 70.58 % of the study area’s groundwater samples have TDS levels below 500 mg/l, which are considered safe for drinking. The EC of the groundwater found that 100 % of the samples fall within the allowed level. Based on these results, the groundwater quality is suitable for drinking and irrigation purposes in Hail region. Hence, this research shows that using GIS and chemical analysis of groundwater could be useful tools for the decision-making process of local and international authorities and water resources management.