Auxiliary Chemical Geothermometers Applied to Waters from Some East African Rift Areas (Djibouti, Ethiopia, Kenya) for Geothermal Exploration

If the temperature values of geothermal reservoirs given by classical chemical geothermometers applied on thermal waters are relatively divergent, it is often difficult to estimate the temperatures of these reservoirs with sufficient accuracy for geothermal exploration, before drilling operations. In this case, some auxiliary chemical geothermometers such as Na-Li, Mg-Li, Na-Rb, Na-Cs, K-Sr, K-F, K-Mn, K-Fe, K-W, etc., existing in the literature can be useful tools to help estimating these temperatures. However, previous studies have shown these geothermometers are not only dependent on temperature, but also on other parameters such as the nature of the reservoir rocks and minerals, the fluid salinity, etc. Consequently, they must be used with caution. Another problem for the use of these geothermometers is that Li, Sr, Cs, Rb, Mn, Fe and W are under the form of trace elements in numerous geothermal waters and that it is often difficult to find analyses of these elements in the literature. In this study, we test some of these auxiliary geothermometers on several waters selected from literature data relative to East African Rift (EAR) geothermal areas, in Republic of Djibouti, Ethiopia and Kenya, where temperature values of deep geothermal reservoirs have been measured into wells or estimated with certainty using chemical classical geothermometers applied on thermal waters. The comparative results are discussed and allow bringing conclusions and recommendations. Among the tested auxiliary geothermometers, this work shows that the Na-Li thermometric relationship defined for the dilute waters from high-temperature volcanic geothermal areas of Iceland is one of the most relevant to estimate the temperatures of deep reservoirs for waters from several geothermal areas from the Republic of Djibouti, Ethiopia and Kenya. In previous studies, this Na-Li thermometric relationship had also given good estimations of reservoir temperatures for high-temperature (T ≥ 300°C) borehole dilute waters from the Los Humeros geothermal area, in Mexico, in volcanic environment. The use of other auxiliary geothermometers such as K-F, K-Sr, Na-Rb and Na-Cs (when F, Sr, Rb and Cs have been analysed) can be also relevant in some cases.

Institutions

Publication Details

Journal
Petroleum and Chemical Industry International
Published
2024-09-17
DOI
https://doi.org/10.33140/pcii.07.04.01
Primary Topic
Geothermal Energy Systems and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Auxiliary Chemical Geothermometers Applied to Waters from Some East African Rift Areas (Djibouti, Ethiopia, Kenya) for Geothermal Exploration

Petroleum and Chemical Industry International
Geothermal Energy Systems and Applications
article

Auxiliary Chemical Geothermometers Applied to Waters from Some East African Rift Areas (Djibouti, Ethiopia, Kenya) for Geothermal Exploration

article en

Abstract

If the temperature values of geothermal reservoirs given by classical chemical geothermometers applied on thermal waters are relatively divergent, it is often difficult to estimate the temperatures of these reservoirs with sufficient accuracy for geothermal exploration, before drilling operations. In this case, some auxiliary chemical geothermometers such as Na-Li, Mg-Li, Na-Rb, Na-Cs, K-Sr, K-F, K-Mn, K-Fe, K-W, etc., existing in the literature can be useful tools to help estimating these temperatures. However, previous studies have shown these geothermometers are not only dependent on temperature, but also on other parameters such as the nature of the reservoir rocks and minerals, the fluid salinity, etc. Consequently, they must be used with caution. Another problem for the use of these geothermometers is that Li, Sr, Cs, Rb, Mn, Fe and W are under the form of trace elements in numerous geothermal waters and that it is often difficult to find analyses of these elements in the literature. In this study, we test some of these auxiliary geothermometers on several waters selected from literature data relative to East African Rift (EAR) geothermal areas, in Republic of Djibouti, Ethiopia and Kenya, where temperature values of deep geothermal reservoirs have been measured into wells or estimated with certainty using chemical classical geothermometers applied on thermal waters. The comparative results are discussed and allow bringing conclusions and recommendations. Among the tested auxiliary geothermometers, this work shows that the Na-Li thermometric relationship defined for the dilute waters from high-temperature volcanic geothermal areas of Iceland is one of the most relevant to estimate the temperatures of deep reservoirs for waters from several geothermal areas from the Republic of Djibouti, Ethiopia and Kenya. In previous studies, this Na-Li thermometric relationship had also given good estimations of reservoir temperatures for high-temperature (T ≥ 300°C) borehole dilute waters from the Los Humeros geothermal area, in Mexico, in volcanic environment. The use of other auxiliary geothermometers such as K-F, K-Sr, Na-Rb and Na-Cs (when F, Sr, Rb and Cs have been analysed) can be also relevant in some cases.

Petroleum and Chemical Industry InternationalVol. 7(4)
Bureau de Recherches Géologiques et Minières (FR)
European Commission
Life below water
Openalex Percentile: Top 100%
Geothermal Energy Systems and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.