Performance of expansive piles and anchors in weak rock
Anchors and piles in weak rock transfer structural loads to the ground through the frictional forces developed at the rough shaft/rock interface. As demonstrated through recent field and laboratory testing, one simple method of improving the load displacement characteristics of this interface (and therefore pile and anchor capacity) is by using expansive cements. This paper briefly describes the research that has been carried out, the reasons why expansive cements work, where and when they can be used, some of the problems associated with their use, the likely improvements in performance that can be achieved, and the methods used to predict the improved performance. Les ancrages et les pieux fondés dans des roches tendres ou à faible capacité’ transfert les charges structurelles au sol par le biais des forces de frottement induites à l’interface pieu/tendon-roche. Les récents essais de laboratoire et in-situ ont démontre qu’une méthode assez simple utilisant des ciments gonflants peut améliorer les caractéristiques charge/déplacement de cette interface (par consequent la capacité des pieux ou des ancrages). Cette communication décrit brièvement, les recherches qui ont été faites, les raisons qui font que les ciments gonflants sont performants, où et quand on peut les utilisés, les problèmes associés à leurs utilisations, les ameliorations probable qu’on peut atteindre, et les méthodes utilisées pour prévoir ces ameliorations.
Authors
- S. Baycan
- C.M. Haberfield
Institutions
- Monash University (AU)
Publication Details
- Published
- 2026-02-12
- DOI
- https://doi.org/10.1201/9781003761716-94
- Primary Topic
- Geotechnical Engineering and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00