Latest Research in Cellular and Composite Structures

Top Research Topics in Cellular and Composite Structures

• Additive Manufacturing and 3D Printing Technologies — 6 papers
• Cellular and Composite Structures — 2 papers
• Injection Molding Process and Properties — 1 papers
• Numerical Analysis — 1 papers
• Epoxy Resin Curing Processes — 1 papers
• Fuel Cells and Related Materials — 1 papers
• Tribology and Wear Analysis — 1 papers
• Additive Manufacturing Materials and Processes — 1 papers
• Iron and Steelmaking Processes — 1 papers
• Polymer crystallization and properties — 1 papers

Highest-Cited Papers

1. Optimizing Injection Molding Parameters for Enhanced Properties in Glass Fiber-Reinforced Polypropylene
2. Geometry-dependent mechanical behavior of mechanically interlocked metal–polymer structures fabricated by hybrid PBF–VPP additive manufacturing
3. Fully mixed virtual element schemes for a new model of steady-state poroelastic stress-assisted diffusion in the brain
4. Tufting‐Based Manufacturing Method for High‐Performance 3D Composite Lap Joints
5. Assembly‐Deviation‐Induced Sealing Leakage in PEMFC Stacks: Failure Mechanisms, Prediction Models, and Process Regulation
6. An Integrated Statistical and Machine Learning Framework for Predicting the Dry Sliding Tribological Behavior of CFRP and GFRP Composites Under Environmental Aging and Loading Conditions
7. Multi-walled design and crushing failure of 3D-printed continuous fibre reinforced composite structure with negative Poisson’s ratio effect
8. Effects of infill pattern, infill ratio and print orientation on the mechanical and vibration response of PLA structures
9. On the importance of property-dependent environmental impact assessment for sustainable additive manufacturing
10. Effect of Printing Speed and Core Relative Density on the Mass-Specific Bending Performance of 3D-Printed PLA Re-Entrant Sandwich Structures
11. Raman Spectroscopy and Generative Variational Autoencoders for Metallurgical Coke Quality Prediction
12. Characteristics of Butt Fusion Welding Conditions for Ethylene Chlorotrifluoroethylene Piping Materials
13. Optimization and Prediction of Mechanical Properties of PLA: Effects of Infill Pattern, Printing Temperature and Annealing Duration Using Taguchi and Artificial Neural Networks
14. Multi-Objective Optimization of Mechanical Properties for FDM-Printed PLA/TPU Blends via Box–Behnken Design and Entropy Weight Method
15. Effect of Infill Pattern, Density, and Orientation on the Mechanical and Surface Characteristics of MEX-Printed PLA Samples for Casting-Pattern Applications
16. Effects of Infill Pattern and Infill Density on the Flexural Properties of Markforged Onyx
17. Investigating effects of printing parameters on flexural strength-to-modulus ratio of 3D printed compliant mechanisms